Zebra.Sdk.Card.Enumerations Namespace |
Provides implementation of SDK specific enumerations.
Enumerations| Enumeration | Description | |
|---|---|---|
 | CalibrationTable |
Specifies a specific calibration table contained in the printer.
|
| CapabilitiesType |
Specifies the type of printer capabilities to request.
|
| CardDestination |
Specifies the destination of the card following job completion.
|
| CardSide |
Specifies the card side to be used for the desired operation.
|
| CardSource |
Specifies the card source location.
|
| CleaningPath |
Specifies a cleaning path for the cleaning operation.
|
| CoercivityType |
Specifies the coercivity type for magnetic encoding.
|
| CustomCard |
Specifies the custom card type to use.
|
| DataCharParity |
Specifies the data character parity for magnetic encoding.
|
| DataFormat |
Specifies the data format for magnetic encoding.
|
| DataSource |
Specifies the data source for the specified magnetic or barcode read operation.
|
| ErrorControlLevel |
Specifies the printer's error control level.
|
| FillType |
Specifies the full coverage print type for Overlay 'O' and Laminate 'L' ribbon panels.
|
| GraphicType |
Specifies the type of image data.
|
| ImageRotation |
Specifies the rotation of the image data.
|
| IPVersion |
Specifies the Internet Protocol to use during device discovery.
|
| KOptimizationType |
Specifies the monochrome optimization mode.
|
| LaminatorOffsetType |
Specifies the laminator offset type to get or set.
|
| LogType |
Available log types.
|
| MagEncoderType |
The type of magnetic encoding supported.
|
| MagEncodingType |
Specifies the type of magnetic encoding to perform.
|
| MediaType |
Specifies the type of media.
|
| OcpLanguage |
Specifies the OCP language.
|
| OrientationType |
Specifies the orientation of the image.
|
| PanelType |
Specifies a specific panel on the card ribbon.
|
| PrinterType |
Specifies the card printer model type.
|
| PrintOptimizationMode |
Specifies the print optimization mode.
|
| PrintType |
Specifies the type of print to be performed for the given image data.
|
| ReservationType |
Specifies the type of reservation to request.
|
| SharpeningLevel |
Specifies the level of sharpening to apply to the image data.
|
| SmartCardType |
Specifies the type of smart card.
|
| Timeout |
Specifies the amount of time before the printer enters standby mode.
|
| TrackNumber |
Specifies the track of the magnetic card to be written to/read from.
|
| TransferTemperatureType |
Specifies a particular re-transfer temperature sensor.
|
| TransferType |
Specifies the transfer type of the printer.
|
| WirelessCryptoType |
Specifies the wireless cryptographic security type.
|
| WirelessSecurityType |
Specifies the wireless security type.
|