SettingsHelperUtilZmotif Interface |
Interface for settings related tasks and information.
Namespace: Zebra.Sdk.Card.Zmotif.Settings
Assembly: SdkApi_Card_Core (in SdkApi_Card_Core.dll) Version: 2.14.1989
SyntaxThe SettingsHelperUtilZmotif type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | GetActiveLUTTable |
Returns the active calibration table identifier.
|
| GetCalibrationTableData |
Returns the specified calibration table data.
|
| GetCalibrationTableNames |
Returns the stored calibration table names and data.
|
| GetCapabilities |
Returns the specified capabilities of the printer.
|
| GetCleaningInterval |
Returns the cleaning interval for the specified path.
|
| GetCleanWarningThreshold |
Returns the clean printer warning threshold.
|
| GetConfiguration |
Returns the configuration of the printer.
|
| GetContactlessSmartCardOffset |
Returns the offset value for the specified contactless smart card encoder type.
|
| GetCustomCardConfiguration |
Returns the configuration of the specified custom card.
|
| GetErrorControlLevel |
Returns the printer's current error control handling mode.
|
| GetHeadResistance |
Returns the printhead resistance value.
|
| GetImageTransferType |
Returns the printer's image transfer type.
|
| GetLaminatorOffset |
Returns the specified laminator offset value.
|
| GetMagneticEncoderOffsets |
Returns the magnetic encoder offset values.
|
| GetNetworkParameters |
Returns the printer's network information.
|
| GetOcpParameters |
Returns the printer's OCP configuration.
|
| GetPanelPowerLevel |
Returns the power level of the specific panel.
|
| GetSmartCardOffset |
Returns the smart card offset value.
|
| GetStandbyTimeout |
Returns the printer's current standby timeout value.
|
| GetTransferTemperatureOffset |
Returns the transfer temperature offset value for the specified sensor.
|
| GetWirelessParameters |
Returns the printer's wireless network information.
|
| LoadCalibrationTableData |
Loads the calibration table data to the printer.
|
| SetActiveLUTTable |
Sets the calibration table to be used by the printer.
|
| SetCleaningInterval |
Sets the the cleaning interval for the specified path.
|
| SetCleanWarningThreshold |
Sets the clean warning threshold of the printer.
|
| SetConfiguration |
Sets the configuration of the printer.
|
| SetContactlessSmartCardOffset |
Sets the contactless smart card encoding position offset value.
|
| SetCustomCardConfiguration |
Sets the custom card configuration.
|
| SetErrorControlLevel |
Sets the printer's error control handling mode.
|
| SetHeadResistance |
Sets the printhead resistance value.
|
| SetLaminatorOffset |
Sets the sepcified laminator offset value.
|
| SetMagneticEncoderOffsets |
Sets the magnetic encoder offsets values.
|
| SetNetworkParameters |
Sets the printer's network configuration information.
|
| SetOcpParameters |
Sets the printers OCP configuration.
|
| SetPanelPowerLevel |
Sets the specificed ribbon panel's power level.
|
| SetSmartCardOffset |
Sets the contact smart card encoding position offset value.
|
| SetStandbyTimeout |
Sets the printer's standby timeout value.
|
| SetTransferTemperatureOffset |
Sets the transfer temperature offset value for the specified sensor.
|
| SetWirelessParameters |
Sets the printer's wireless network information.
|
See Also