- cameraSpecific - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific
-
Provide access to set the camera specific settings if the scanner device is camera.
- canadian_postal - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Canadian Postal.
- canadianPostal - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The CanadianPostal class provides access to parameters that are
available for the CanadianPostal decoder.
- cancelNotification() - Method in class com.symbol.emdk.notification.NotificationDevice
-
This cancels the active notification from the device.
- cancelRead() - Method in class com.symbol.emdk.barcode.Scanner
-
This Cancels any pending asynchronous read() calls.
- cancelRead() - Method in class com.symbol.emdk.simulscan.SimulScanReader
-
Deprecated.
This cancels any pending read() calls
- category - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.DataDelivery.Intent
-
Deprecated.
Gets and Sets the intent category.
- characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific
-
Sets the character set to be used to decode the returned barcode data.
- characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific
-
Sets the character set to be used to decode the returned barcode data.
- characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific
-
Sets the character set to be used to decode the returned barcode data.
- check_digit - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Interleaved_2of5
-
Deprecated.
The check digit type to verify.
- check_digit - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.MSI
-
Deprecated.
With MSI symbols, one check digit is mandatory and always verified by the reader.
- check_digit_scheme - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.MSI
-
Deprecated.
Two algorithms are possible for the verification of the second MSI check digit.
- check_isbt_table - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code128
-
Deprecated.
The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs.
- checkDigitModulus - Variable in class com.symbol.emdk.barcode.ScannerConfig.OcrParams
-
Set the check digit modulus value for OCR Check Digit Calculation
- checkDigitMultiplier - Variable in class com.symbol.emdk.barcode.ScannerConfig.OcrParams
-
Set OCR check digit multipliers for the character positions
- checkDigits - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Msi
-
With MSI symbols, one check digit is mandatory and always
verified by the reader.
- checkDigitScheme - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Msi
-
Two algorithms are possible for the verification of the second
MSI check digit.
- checkDigitValidation - Variable in class com.symbol.emdk.barcode.ScannerConfig.OcrParams
-
Select check digit validation Scheme
- checkIsbtTable - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code128
-
The ISBT specification includes a table that lists several types
of ISBT barcodes that are commonly used in pairs.
- chinese2of5 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The Chinese_2of5 class provides access to parameters that are
available for the Chinese2of5 decoder.
- chinese_2of5 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Chinese 2 of 5.
- clsi_editing - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Codabar
-
Deprecated.
Enable this parameter to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol.
- clsiEditing - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.CodaBar
-
Enable this parameter to strip the start and stop characters and
insert a space after the first, fifth, and tenth characters of a
14-character Codabar symbol.
- codaBar - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The CodaBar class provides access to parameters that are available
for the CodaBar decoder.
- codabar - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
-
Deprecated.
- codabar - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Codabar.
- code11 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The Code11 class provides access to parameters that are available for
the Code11 decoder.
- code11 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
-
Deprecated.
- code11 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Code11.
- code128 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The Code128 class provides access to parameters that are available
for the Code128 decoder.
- code128 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
-
Deprecated.
- code128 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Code 128.
- code39 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The Code39 class provides access to parameters that are available for
the Code39 decoder.
- code39 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
-
Deprecated.
- code39 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Code 39.
- code93 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The Code93 class provides access to parameters that are available for
the Code93 decoder.
- code93 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
-
Deprecated.
- code93 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Code 93.
- code_id_type - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.ScanParams
-
Deprecated.
A Code ID character identifies the code type of a scanned bar code.
- codeIdType - Variable in class com.symbol.emdk.barcode.ScannerConfig.ScanParams
-
A Code ID character identifies the code type of a scanned barcode.
- color - Variable in class com.symbol.emdk.notification.Notification.LEDParams
-
The color for blinking LED on the notification device using RGB format.
- column - Variable in class com.symbol.emdk.personalshopper.CradleConfig.CradleLocation
-
The column identification number.
- com.symbol.emdk - package com.symbol.emdk
-
- com.symbol.emdk.barcode - package com.symbol.emdk.barcode
-
- com.symbol.emdk.notification - package com.symbol.emdk.notification
-
- com.symbol.emdk.personalshopper - package com.symbol.emdk.personalshopper
-
- com.symbol.emdk.sam - package com.symbol.emdk.sam
-
- com.symbol.emdk.scanandpair - package com.symbol.emdk.scanandpair
-
- com.symbol.emdk.serialcomm - package com.symbol.emdk.serialcomm
-
- com.symbol.emdk.simulscan - package com.symbol.emdk.simulscan
-
- composite_AB - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
-
Deprecated.
- composite_ab - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Composite AB.
- composite_c - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Composite C.
- compositeAB - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The Composite_AB class provides access to parameters that are
available for the CompositeAB decoder.
- compositeC - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The Composite_C class provides access to parameters that are
available for the CompositeC decoder.
- config - Variable in class com.symbol.emdk.personalshopper.Cradle
-
The field to access Cradle configuration.
- config - Variable in class com.symbol.emdk.scanandpair.ScanAndPairManager
-
The ScanAndPairManager.config provides a way to configure the settings to use it in scanAndPair() or scanAnUnpair() methods.
- connect() - Method in class com.symbol.emdk.sam.SAM
-
Connects to the SAM.
- connection_idle_time - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.ScanParams
-
Deprecated.
If a bluetooth scanner associated application is opened, Bluetooth
scanner will be automatically disconnected after this Connection
Idle Time duration from inactivity
- connectionEstablishTime - Variable in class com.symbol.emdk.barcode.InterfaceConfig
-
Timeout in seconds that Scanner.enable() will block before returning if an external scanner connection is not established.
- connectionIdleTime - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific
-
This is the time (in seconds) when an external scanner is idle in a particular state (ScannerStates.IDLE to
ScannerStates.WAITING) after which the connection between the terminal and the scanner is severed to conserve
power.
- connectionIdleTime - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific
-
This is the time (in seconds) when an external scanner is idle in a particular state (ScannerStates.IDLE to
ScannerStates.WAITING) after which the connection between the terminal and the scanner is severed to conserve
power.
- ConnectionType - Enum in com.symbol.emdk.notification
-
- continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific
-
- ContinuousRead() - Constructor for class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ContinuousRead
-
Deprecated.
- continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific
-
- continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific
-
- convert_itf14_to_ean13 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Interleaved_2of5
-
Deprecated.
Convert 14-character Interleaved 2 of 5 bar codes to EAN-13, and transmit as EAN-13.
- convert_to_code32 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code39
-
Deprecated.
Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry (default - disabled).
- convert_to_ean13 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.EAN8
-
Deprecated.
Convert EAN8 data to EAN 13.
- convert_to_upca - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.UPCE0
-
Deprecated.
Enable to convert UPCE0 (zero suppressed) decoded data to UPC-A format before transmission.
- convert_to_upca - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.UPCE1
-
Deprecated.
Enable this to convert UPCE1 decoded data to UPC-A format before transmission.
- convertDataBarToUpcEan - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
-
If this is set it converts DataBar barcodes to UPC/EAN format.
- convertToCode32 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code39
-
Code 32 is a variant of Code 39 used by the Italian
pharmaceutical industry.
- convertToEan13 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Ean8
-
Flag to convert EAN8 to EAN13.
- convertToEan13 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.I2of5
-
Convert 14-character Interleaved 2 of 5 barcodes to EAN-13, and
transmit as EAN-13.
- convertToUpca - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Upce0
-
Flag to enable conversion from UPCE0 to UPCA barcode.
- convertToUpca - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Upce1
-
Flag to enable conversion from UPCE1 to UPCA barcode.
- coupon - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams
-
Deprecated.
Enables Coupon code decoding.
- coupon_report - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams
-
Deprecated.
Used to differentiate between old coupon (UPC/EAN and Code128) and new GS1 DataBar Coupons.
- couponCode - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
-
Enables Coupon code decoding.
- couponReport - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
-
Used to differentiate between old coupon (UPC/EAN and Code128)
and new GS1 DataBar Coupons.
- Cradle - Class in com.symbol.emdk.personalshopper
-
Class to communicate with the MC18 and PS20 cradles.
- cradle - Variable in class com.symbol.emdk.personalshopper.PersonalShopper
-
The field to access the cradle features.
- CradleConfig - Class in com.symbol.emdk.personalshopper
-
The class to access cradle configuration.
- CradleConfig.CradleLocation - Class in com.symbol.emdk.personalshopper
-
The class for provides access to the cradle location.
- CradleException - Exception in com.symbol.emdk.personalshopper
-
The methods of cradle API throw a CradleException when an error
occurs.
- CradleInfo - Class in com.symbol.emdk.personalshopper
-
This class holds cradle information.
- CradleLedFlashInfo - Class in com.symbol.emdk.personalshopper
-
The class to hold the LED Flash settings.
- CradleLedFlashInfo(int, int, boolean) - Constructor for class com.symbol.emdk.personalshopper.CradleLedFlashInfo
-
Constructor to instantiate the CradleLEDConfig.
- CradleLocation(int, int, int) - Constructor for class com.symbol.emdk.personalshopper.CradleConfig.CradleLocation
-
Constructor
- CradleResults - Enum in com.symbol.emdk.personalshopper
-
Defines all the error codes the cradle API returns.
- CreateNameValuePair(String, String, String) - Static method in class com.symbol.emdk.ProfileManager
-
This function creates a name value pair string according to the
Name-Value pair request.